𝐖𝐡𝐚𝐭’𝐬 𝐭𝐡𝐞 𝐛𝐞𝐬𝐭 𝐰𝐚𝐲 𝐭𝐨 𝐰𝐨𝐫𝐤 𝐰𝐢𝐭𝐡 𝐜𝐨𝐫𝐧𝐞𝐫 𝐥𝐚𝐬𝐡𝐞𝐬 𝐥𝐢𝐤𝐞 𝐭𝐡𝐢𝐬?

𝐖𝐡𝐚𝐭’𝐬 𝐭𝐡𝐞 𝐛𝐞𝐬𝐭 𝐰𝐚𝐲 𝐭𝐨 𝐰𝐨𝐫𝐤 𝐰𝐢𝐭𝐡 𝐜𝐨𝐫𝐧𝐞𝐫 𝐥𝐚𝐬𝐡𝐞𝐬 𝐥𝐢𝐤𝐞 𝐭𝐡𝐢𝐬?

Using tape strategically can help you access the corner lashes and ensure precision in applying extensions. Here’s a step-by-step guide to taping for easier corner lash application:

𝟏. 𝐏𝐫𝐞𝐩𝐚𝐫𝐞 𝐭𝐡𝐞 𝐄𝐲𝐞 𝐀𝐫𝐞𝐚 Ensure the client's eye area is clean and dry. Place a standard gel pad under the eye to cover the lower lashes.

𝟐. 𝐀𝐩𝐩𝐥𝐲 𝐆𝐞𝐧𝐭𝐥𝐞 𝐒𝐭𝐫𝐞𝐭𝐜𝐡 𝐰𝐢𝐭𝐡 𝐓𝐚𝐩𝐞 Choose a gentle, hypoallergenic medical tape to avoid irritation. Cut a small piece of tape (about 1–1.5 inches) and place it on the outer edge of the eyelid, gently pulling it slightly outward and upward. The tape should lift and expose the outer corner lashes while keeping the skin taut, giving you better access without causing discomfort.

𝟑. 𝐔𝐬𝐞 𝐀𝐝𝐝𝐢𝐭𝐢𝐨𝐧𝐚𝐥 𝐓𝐚𝐩𝐞 𝐟𝐨𝐫 𝐈𝐧𝐧𝐞𝐫 𝐂𝐨𝐫𝐧𝐞𝐫𝐬 (𝐎𝐩𝐭𝐢𝐨𝐧𝐚𝐥) For inner corners, use a smaller piece of tape if needed. Gently pull the tape inward and place it on the bridge of the nose to keep the inner corner lashes exposed.

𝟒. 𝐀𝐝𝐣𝐮𝐬𝐭 𝐭𝐡𝐞 𝐓𝐚𝐩𝐞 𝐚𝐬 𝐍𝐞𝐞𝐝𝐞𝐝 If you notice that the lashes are not well-isolated or if the tape is pulling too much, adjust it slightly. Avoid pulling too hard; you just want enough tension to reveal the corner lashes.

𝟓. 𝐀𝐩𝐩𝐥𝐲 𝐋𝐚𝐬𝐡𝐞𝐬 𝐰𝐢𝐭𝐡 𝐏𝐫𝐞𝐜𝐢𝐬𝐢𝐨𝐧 With the corner lashes exposed, it’s easier to isolate and apply extensions. Proceed with shorter, lighter lashes for the corners as mentioned, ensuring each one is well-isolated and placed at the right angle. I use Ariya Lashes here: https://buff.ly/3XEviQX

𝟔. 𝐑𝐞𝐦𝐨𝐯𝐞 𝐓𝐚𝐩𝐞 𝐆𝐞𝐧𝐭𝐥𝐲 Once you're done with the corner application, slowly remove the tape. Make sure to support the skin with one hand as you pull the tape off to minimize any discomfort.